The Poly Jumbo Bin (PJB) is one of the most durable
heavy duty IBC’s in the industry. This shipping
and storage container is manufactured with constant
reusability in mind. The PJB quickly became the container
of choice for the safe handling and transportation of
corrosive liquids. By enclosing a chemical resistant
polyethylene bottle within a ¼” double
reinforced, polymeric coated, mesh and structural steel
cage, the PJB is an intermediate bulk container that
will last.
Heavy Duty Bottle
3/8” thick bottle
DOT and UN approved.
LLD Polyethylene
Translucent for constant level indication
Structural design of the top surface for greater
rigidity
UN Markings stamped on the top of the bottle
Top opening with a 7” screw cap with a EPDM
gasket and a 2” threaded bung with EPDM gasket
Operational
Valve Assembly
4-bolt standard (1-1/2” port), 2” Banjo
Polypropylene ball valve with Teflon seats, viton
O-ring, male cam-lock, and cam-lock dust cap
Heavy-Duty Metal Cage
1/4” double-reinforced 2” x 2”
wire mesh with double strands every 6 to 8 inches
across the horizontal plane
Two large label plates (front and back)
Restraining hold-down bars across the top for rigidity
Chemical resistant paint (normally blue)
Solid steel bottom with fabricated weep holes
Protruding bumpers for protection during transport
Four large tubular steel legs for ease in stacking
and support of unit
Operational
Labeled UN 31 HA1. Specific Gravity of 1.92
Four-way fork truck entry
Stackable 3-high
Interstackable with all standard IBC’s with
footprint of 42” x 48”
Easy transfer system
Available in new and reconditioned units.
Part#
Gallons
Length
Width
Height
Tare Weight
PJB-180
180
42”
48”
45”
538 lbs.
PJB-250
250
42”
48"
51”
584 lbs.
PJB-290
290
42”
48"
53”
590 lbs.
PJB-350
350
42”
48"
63”
676 lbs.
PJB-400
400
42”
48"
72”
788 lbs.
PJB-550
550
42”
48"
86”
n/a
Is acquiring spare parts in a timely manner a major
problem? We have a full line of replacement bottles
and pillows (pads) for most major manufactures, as well
as a full line of replacement valves, fittings, relief
devices and fill caps. Now you can replace old, weak,
brittle, worn-out bottles that no longer make the grade
as UN approved containers, or maybe missing valves or
broken caps.
‡Due to the industries strong familiarity
with the Poly Jumbo Bin (PJB) name, Dale Chesser, LLC.
has grouped the Poly Jumbo Bin (PJB) and the Poly 1in
the same category. The Poly Jumbo Bin name is owned
by the Clawson Tank Co. and the Poly 1 name is owned
by Dale Chesser, LLC.
† The 550 gallon unit cannon hold a UN Certification.
